The bloodstream of your vessel is the fuel system. If this vital system is not performing optimally, you could be putting your vessel’s overall health at risk.
The fuel system is compromised of several major components: the fuel tank, fuel lines, fuel pump, fuel injectors, and fuel filter
Should any of these components fail, you’ll be in serious trouble.
Getting your engine the proper amount of fuel at the appropriate time is vital to the performance of your diesel engine. The most common issue that prevents this from happening properly is a malfunctioning fuel injector. Having your injectors serviced on a regular basis is crucial, especially if the equipment sits unused for prolonged periods of time, and particularly if it does so without a full tank of fuel. The servicing of injectors is a fairly straightforward task, but one that requires a keen eye, patience, knowledge of the required nozzle pressures, and knowledge of the injector manufacturer’s recommendation for spray pattern.
Most of the time you can check the operation and performance of the injector by pop testing it. This will expose many failures, such as clogged holes or if the nozzle is dripping.
If you have a poorly performing injector, then having a rebuild done is the way to go. When a professional troubleshoots your fuel injection system, they will perform several tests to determine exactly what is causing the issue. They will examine the nozzles, guides, and seats to ensure proper alignment and functionality, replacing worn or broken parts when needed.
The technician will also check for the seating of the fuel injector nozzle and injector body. While checking the fitment of the nozzle and body, the technician will also inspect the nozzle spring for breakage, defects, and overall functionality. After any major rebuild, the technician will then set the injector to the correct opening pressures and go through a series of tests and make appropriate adjustments, getting your fuel injector back to the manufacturer’s recommended specifications.
Having your fuel system serviced regularly is a vital to keeping your diesel engine in the best shape possible. You should have your fuel system serviced by fuel injection specialists, prolonging the life of the system and extending the time between major overhauls and repairs of your engine.
Clean diesel technology in today’s properly maintained vehicles emits near zero levels of emissions. However, you may have started experiencing any of the following: Rough Idle Hard Starting Loss of Power Decreased Mileage Increased Exhaust Smoke Slow Throttle Response Diesel fuel deposits can form in many areas of the fuel system including: fuel lines, injector pump, injector nozzles, and combustion chamber causing any of the listed above along with drivability problems. Belden’s offers the BG Diesel Injection Service that will help: Increase Power and Performance Increase Miles per Gallon Decrease Smoke Emissions Improve Accelerator Response The BG Diesel Injection Service will remove deposits from the fuel injectors, clean soot-black deposits from the fuel filter, prevent component corrosion and clean stubborn oil deposits. The service is intended to optimize fuel economy, prevent failure of very expensive fuel injectors, and increase overall engine performance and drivability. Fuel Injectors that are clean and functioning properly are key to getting the best performance and fuel mileage from your diesel engine
SEALAND FUEL INJECTION SERVICE
This is a content preview space you can use to get your audience interested in what you have to say so they can’t wait to learn and read more. Pull out the most interesting detail that appears on the page and write it here.
Copyright © 2024 Sealand Hydraulics & Marine Service - All Rights Reserved.